Choose your mould
Start with the hexagon or capsule tray included in your kit. Set it on a level surface.


EVERYTHING TO BEGIN
From mixing to demoulding, the essentials are in the box. Pick your colours, pour your first pieces and see what ECO100 can do.
Your first casting projects, all in one box.
The ECO100 powder-and-liquid system, three pigments, two silicone moulds and the small essentials to get started.
MEET YOUR FIRST CAST
Haksons ECO100 has a natural ivory base colour, not pure white. This warm undertone can influence lighter and pastel shades.
Shown without added pigment. Actual colour may vary with lighting and screens.Add Super White Pigment to achieve a brilliant white finish with ECO100.
YOUR FIRST CAST
Open the kit, choose a mould and make something of your own. Here's how to begin.
Start with the hexagon or capsule tray included in your kit. Set it on a level surface.
Weigh ECO100 powder and its dedicated liquid at 2.5:1 by weight. Use the calculator below to estimate what your mould needs.
Add a little of an included pigment to the liquid, then add the powder and mix thoroughly until smooth.
Pour into the mould and gently tap to release trapped air. Working time is approximately 5 minutes; demould after approximately 30 minutes in suitable conditions.
Your kit contains 600 g powder and 240 g liquid — 840 g total ECO100 material. The pigments and accessories are additional.
Mix only what your project needs. The mould size and fill depth determine how much material to prepare.
START WITH AN IDEA
Move along the scale. See what goes into the mix.
Working and demould times are approximate and vary with casting conditions.

Tap the bottle to measure 100 g.
Set out a clean, dry mould, mixing container, scale and mixing tool. Work on a protected, level surface.
Weigh 1 part Haksons ECO100 Liquid to 2.5 parts Haksons ECO100 Base. Example: 100 g liquid + 250 g base = 350 g total mix.
If colouring, disperse compatible pigment into the liquid before adding the powder. Follow the pigment's recommended loading.
Working time is approximately 5 minutes. Gradually add the weighed base to the liquid and stir thoroughly, scraping the sides and bottom, until smooth.
Pour carefully into the prepared mould. Gently tap the mould if needed to help trapped air escape.
Allow approximately 25 minutes before carefully demoulding. Timing can vary with room conditions and the size of your cast.
Yes. Haksons ECO100 offers a very similar casting experience to Jesmonite® AC100. Both use a powder and a dedicated liquid component to create smooth, solid castings. If you have worked with Jesmonite® before, the process will feel familiar.
Mix Haksons ECO100 at 2.5 parts powder to 1 part liquid by weight. For example, use 250 g powder with 100 g liquid. Measure both components using a digital weighing scale.
Yes. Haksons ECO100 is compatible with Jesmonite® pigments. You can use them for solid colours, marbling, terrazzo and other decorative effects.
No. ECO100 uses its own specially formulated acrylic liquid. Do not replace the supplied liquid with water. The dedicated liquid helps produce a smooth, solid finish without the powdery or chalky feel often associated with conventional water-mixed casting powders.
The approximate working time is 5 minutes, and castings can typically be demoulded after 30 minutes. Times vary with casting size, thickness and surrounding conditions. Demould time is not the same as full cure time.
Haksons ECO100 has a natural ivory base colour, not pure white. The warm undertone is visible in unpigmented castings and can influence lighter and pastel shades.
ECO100 is suited to decorative casting projects such as trays, coasters, candle holders, planters, sculptures, terrazzo pieces and handcrafted home accessories. It supports solid colouring, marbling and terrazzo techniques.
We recommend sealing finished pieces, especially those exposed to moisture, stains or frequent handling. Haksons Acrylic Sealer and Gloss Coat are options depending on the finish and protection required.
Yes. The two-component system is straightforward to weigh, mix and pour. If you are new to casting, start with a small project, follow the recommended mixing ratio and prepare your mould before mixing.
For years, we brought Jesmonite® to makers across India. We loved seeing what people created with it.
Along the way, we started asking a question: could we develop a casting material of our own?
That curiosity became Haksons ECO100 — a mineral-based casting system paired with a specially formulated acrylic liquid, developed through years of working with makers.
THREE COLOURS INCLUDED
Your kit includes three 10 g pigments. Explore other colours when you are ready to make more.
TWO MOULDS INCLUDED
Start with the included hexagon and capsule tray moulds. Explore more shapes for your next projects.
Explore sealers and finishes for decorative pieces. Test any finish on a small Haksons ECO100 sample before applying it to your work.
Comparing casting materials? Read our guide to Jesmonite® AC100, AC730 and Haksons ECO100 →
FOR YOUR NEXT PROJECT
Use our material calculator to estimate quantities before you mix.