
Haksons ECO 100 — Water-Based Eco Resin for Casting
Product & regulatory information
- Country of origin
- India
- Packed by
- M.S. Enterprises338, Shukrawar Peth
Pune - 411037+919545533033 - Marketed by
- M.S. Enterprises338, Shukrawar Peth
Pune - 411037+919545533033

A water-based acrylic composite system developed for creative casting.
Designed for smooth mixing, easy pouring and a refined finish.
DEVELOPED IN INDIA
Natural ivory
Haksons ECO100 has a natural ivory base colour, not pure white. This warm undertone can influence lighter and pastel shades.
Shown without added pigment. Actual colour may vary with lighting and screens.Add Super White Pigment to achieve a brilliant white finish with ECO100.
START WITH AN IDEA
A little.
Or a lot.
Move along the scale. See what goes into the mix.
BY WEIGHT
Working and demould times are approximate and vary with casting conditions.

Make your
first cast.
Tap the bottle to measure 100 g.
HOW TO USE Haksons ECO100
Set out a clean, dry mould, mixing container, scale and mixing tool. Work on a protected, level surface.
Weigh 1 part Haksons ECO100 Liquid to 2.5 parts Haksons ECO100 Base. Example: 100 g liquid + 250 g base = 350 g total mix.
If colouring, disperse compatible pigment into the liquid before adding the powder. Follow the pigment's recommended loading.
Working time is approximately 5 minutes. Gradually add the weighed base to the liquid and stir thoroughly, scraping the sides and bottom, until smooth.
Pour carefully into the prepared mould. Gently tap the mould if needed to help trapped air escape.
Allow approximately 25 minutes before carefully demoulding. Timing can vary with room conditions and the size of your cast.
A few things
worth knowing.
Is ECO100 similar to Jesmonite® AC100?
Yes. Haksons ECO100 offers a very similar casting experience to Jesmonite® AC100. Both use a powder and a dedicated liquid component to create smooth, solid castings. If you have worked with Jesmonite® before, the process will feel familiar.
What is the mixing ratio for ECO100?
Mix Haksons ECO100 at 2.5 parts powder to 1 part liquid by weight. For example, use 250 g powder with 100 g liquid. Measure both components using a digital weighing scale.
Can I use Jesmonite® pigments with ECO100?
Yes. Haksons ECO100 is compatible with Jesmonite® pigments. You can use them for solid colours, marbling, terrazzo and other decorative effects.
Is ECO100 mixed with water?
No. ECO100 uses its own specially formulated acrylic liquid. Do not replace the supplied liquid with water. The dedicated liquid helps produce a smooth, solid finish without the powdery or chalky feel often associated with conventional water-mixed casting powders.
How long does ECO100 take to set and demould?
The approximate working time is 5 minutes, and castings can typically be demoulded after 30 minutes. Times vary with casting size, thickness and surrounding conditions. Demould time is not the same as full cure time.
What is ECO100’s natural base colour?
Haksons ECO100 has a natural ivory base colour, not pure white. The warm undertone is visible in unpigmented castings and can influence lighter and pastel shades.
What can I make with ECO100?
ECO100 is suited to decorative casting projects such as trays, coasters, candle holders, planters, sculptures, terrazzo pieces and handcrafted home accessories. It supports solid colouring, marbling and terrazzo techniques.
Do ECO100 castings need sealing?
We recommend sealing finished pieces, especially those exposed to moisture, stains or frequent handling. Haksons Acrylic Sealer and Gloss Coat are options depending on the finish and protection required.
Is ECO100 suitable for beginners?
Yes. The two-component system is straightforward to weigh, mix and pour. If you are new to casting, start with a small project, follow the recommended mixing ratio and prepare your mould before mixing.
here.
Rooted in India.
For years, we brought Jesmonite® to makers across India. We loved seeing what people created with it.
Along the way, we started asking a question: could we develop a casting material of our own?
That curiosity became Haksons ECO100 — a mineral-based casting system paired with a specially formulated acrylic liquid, developed through years of working with makers.
COLOUR FOR Haksons ECO100
Make it yours.
Explore the pigment range. Always check compatibility with Haksons ECO100 before mixing.
MOULDS
Choose what to make.
Coasters, trays, dishes and vessels to bring your Haksons ECO100 ideas to life.
Finishing touches.
Explore sealers and finishes for decorative pieces. Test any finish on a small Haksons ECO100 sample before applying it to your work.
Comparing casting materials? Read our guide to Jesmonite® AC100, AC730 and Haksons ECO100 →
MADE TO MAKE, IN YOUR POCKET
Your material calculator — and more.
Calculate your mix, follow your project, and save what worked.







