Cylinder Silicone Planter Mould

1. Prepare your materials: Before using the silicone moulds, make sure you have all the materials you need for your project. This might include the resin, Jesmonite, concrete, or wax you will be using, as well as any additives or coloring agents.

2. Clean the mould: Before using the mould, it is a good idea to clean it thoroughly. This will help ensure that your finished product comes out clean and clear. To clean the mould, simply wipe it down with a damp cloth or wash it with soap and water.

3. Mix your materials: Follow the instructions for your chosen material to mix it according to the manufacturer's recommendations. If you are using resin, for example, you will need to mix the resin and hardener together according to the proportions specified in the instructions.

4. Pour the mixture into the mould: Once your materials are mixed, carefully pour the mixture into the silicone mould. Be sure to fill the mould completely, taking care to avoid creating any air bubbles.

5. Allow the material to cure: Depending on the material you are using, it may take anywhere from a few hours to a few days for the mixture to fully cure. Follow the manufacturer's instructions for the recommended curing time.

6. Remove the finished product from the mould: Once the material has fully cured, gently flex the silicone mould to release the finished product. If the mould is non-stick, the finished product should come out easily. If you are having difficulty removing the product, you can try using a small tool such as a toothpick or a butter knife to help gently pry it out.

7. Clean and store the mould: After use, be sure to clean the silicone mould thoroughly to remove any excess material. You can wash the mould with soap and water or wipe it down with a damp cloth. Once the mould is clean, store it in a cool, dry place until you are ready to use it again.

Yes, Bohriali's silicone moulds are designed to be versatile and can be used with a variety of materials, including epoxy resin, Jesmonite, concrete, and wax.

To clean the silicone moulds, simply wipe them down with a damp cloth or wash them with soap and water. For tougher stains, you can try using a mild detergent or a silicone mould-specific cleaner. Be sure to rinse the mould thoroughly and dry it completely before storing it.

It is generally not recommended to use silicone moulds in the oven or microwave. While some silicone moulds may be heat-resistant to a certain degree, they are not designed for use at high temperatures and may become damaged or deformed if exposed to heat for extended periods of time.

To store the silicone moulds, simply place them in a cool, dry place out of direct sunlight. Avoid stacking the moulds on top of each other, as this can cause them to become deformed. If you will not be using the moulds for an extended period of time, it is a good idea to wrap them in a protective material such as plastic wrap or a plastic bag to help prevent dust or dirt from accumulating on them.

Download BohriAli’s Resin Calculator App for Iphone

Download BohriAli’s Resin Calculator App for Android