Syncoat Epoxy Finish is an air drying two component epoxy system giving an extra-tough, adherent excellent chemical resistant coating.It is an ideal system for resistance to Corrosive enviroments, Alkalies & Moderate acids.
Warning: Last items in stock!
It should be mixed in a ratio by volume of 3 part of paint with 1 part of hardener and dilute with Syncoat Epoxy Thinner ST-13 if required. The mixture should be used within 6-8 Hrs.Application by brush or by spray.
The surface to be painted should be free from dust, grease, oil, etc. Apply Epoxy Red Oxide/ Epoxy Zinc Chromate Primer. After 24 hrs apply 2-3 coats of Syncoat Epoxy Finish. Recoating of the top coat always enchanes the performance.
The finish coat should be dried at 60-65 C for 2 hrs or to be cured for 168 hrs at room temperature.
|Image||Price||Reference||Pack Size||Add to cart|