It is a high performance two pack cost effective quality air drying Epoxy primer to be used for steel structures in highly corrosive atmospheres like chemical plants, on shore off shore installation, ships etc.
Warning: Last items in stock!
|Type||Based on Epoxy Resins & Anticorrosive Zinc Phosphate pigment and curede with hardener|
|Features||A two pack cost effective quality air drying Epoxy primer with base and hardener packed & supplied. To be over coated with a suitable epoxy finish coat to give a highly anticorrosive & chemical resistant coating.|
|Recommended Use||As a high performance primer to steel structures in highly corrosive atmospheres like chemical plants, on shore off shore installation, ships etc.|
|Volume Solids||35 ± 2%|
|Finish||Smooth & Matt|
|Flash Point||Above 36˚C|
|Drying Time at 30˚C and RH 70%||Surface Dry : 10 Minutes
Tack Free Dry : 20 Minutes
Hard Dry : Overnight
Full Cure : 7 Days
|Over Coating||Good results between 16-20 hrs|
|Mixing Ratio||3:1 (Base : Hardener) by volume|
|Pot Life||4-6 hrs|
|Maturation Time||20-30 mins|
|Application||By brush or conventional spray|
|Thinner||Epoxy Thinner ST 20|
|Recommended DFT||25 - 35µ|
|Theoretical Spreading Rate||10 to 14m²/ltr per coat at recommended DFT|
|Succeeding Coat||Air Drying Epoxy intermediates or Epoxy enamels, PU enamels|
|Adhesion||Excellent. Passes 100/100|
|Scratch Hardness||Excellent (1500gms)|
|Corrosion Resistance||Excellent. Passes 240 hrs a system|
|Salt Spray Resistance||Excellent. Passes 250 hrs a system|
|Water Resistance||Excellent. Passes 250 hrs a system|
|Chemical Resistance||Excellent to mild acidic & alkaline conditions|
|Shelf Life||6 months in separate sealed packs at normal ambient temperature.|
|Remarks||1. Stir well before use.
2. Ensure that the surface is properly cleaned, derusted & degreased, Sand Blasting to Sa 2½ recommended for best result.
|Packing||20 ltrs, 4 ltrs & 1 ltr|
|Image||Price||Reference||Pack Size||Add to cart|