Haksons Resin & Hardener in a 2-part Epoxy Resin clear coat designed specifically for creative applications. The two products are available in a ratio of 2:1. This ratio must be maintained while preparing the Haksons Epoxy Resin and Hardener clear coat.
This is a pack of two bottles consisting of Haksons Epoxy Resin and Hardener. It has to be used in a ratio of 2:1. Detailed instructions on preparation of the epoxy clear coat are mentioned on the label and graphic above. Do not mix more than 600 ml in one go! The mixture is an exothermic reaction and more the resin, more is the heat generated. Be extremely careful during summers, because the resin and hardener are more conducive to reaction and will generate a lot of heat if kept for a longer period of time!
The Haksons Epoxy Resin and Hardener cures completely in 24 hours.
After it cures totally you will get a thick, glossy topcoat that graces the surface of artwork, photographs and wood giving it a gorgeous modern look. This will give a thick protective sheen to your surface.
It's time to get that look for yourself. And it's totally doable. The application of the epoxy resin requires no professional skills and can be used for a number of applications like paintings, table tops, jewellery, electronics (Potting and sealing), sculptures, name plates, and much much more. A brief look at our pinterest board will give you an insight into the number of things you can do with the Haksons Resin and Hardener.
Haksons Epoxy Resin and Hardener can be tinted in a variety of colours by mixing Haksons Concentrated Pigments with it. These are available in a variety of beautiful colours which can be purchased from our website. We also have Glow in the dark pigment which can be mixed or used as a different media in the Epoxy Resin. Use an artist's blow torch to get rid of air bubbles from the surface of the Haksons Epoxy resin top coat.