Esdee Syncoat Zinc Etch Primer Yellow

Check your delivery options 


New

It is a two pack system, ideal for use on Aluminium & its alloys as it etches the surface to improve the adhesion of finish coat.
It can be over coated with any kind of Primer Surfacer, Finish coats, etc ,depending on the requirements.

Rs. 1,053

-11%

Rs. 1,183

Type PVB Based, 2 pack Etch/Wash Primer with Zinc Tetroxy Chromate
Recommended UseThis is a two pack system, ideal for use on Aluminium & its alloys as it etches the surface to improve the adhesion of finish coat.
It can be over coated with any kind of Primer Surfacer, Finish  coats, etc ,depending on the requirements.
Surface PreparationThe surface should be free from oil, grease and other contaminants.
Mixing Ratio (By Volume)1:1 (Base : Catalyst)
Maturation Time 10 minutes 
Pot Life (at 30˚C)4 to 5 hours 
Properties 
Colours Semi-transparent Yellow
FinishSmooth & Matt
Drying Time at 30˚C Surface Dry : 10 Minutes
Overcoating : After 1 Hour
Can be forced dried at 85 to 100˚C for 15 minutes.
Flash PointAbove 12˚C
Application Data  
Application By spray or brush
Recom. ThinnerSyncoat Thinner ST-14
Thinning Ratio (if required)Approx. 100 ml for 1Ltr of primer
Theoretical Spreading Rate10 to 13 sq.m/ltr.per coat at 5-8 microns D.F.T.
Performance Data (after Full cure as a system)
Shelf Life 6 months in separate packs at normal ambient temperature.
Packing 4Ltrs and 1Ltr.
ImagePriceReferencePack SizeAdd to cart
- Rs. 1,053-4 Ltrs
- Rs. 274-1 Ltr
Add to cart

Related Products